Can I Put a Gun Mount Safe in a Mobile Home?

The answer is yes! With careful planning and some creative modifications, you can most definitely install an additional gun safe, like the best car holsters, magnetic mounts into your mobile home more than in your drivers seat that will securely hold all of your firearms while still being within arms reach at any time.

Risks In Keeping A Gun Safe

A gun safe is designed to keep your gun(s) and ammo safe. It will not only safeguard access to your weapon (s), but it will also protect them against hazards such as theft, water, fire, or any other natural disaster.

If you have children or pets at home, you run the risk of the child locking themselves in the safe (always lock the safe after using it) or the safe gun quickly toppling over the child or pet (anchoring the safe can prevent this with center console and strong magnet).

Size And Weight Considerations

If you want to buy a safe right now and put it in your mobile home, make sure you get one that fits through the door. The ideal weight for a mobile house is 1000 pounds or less. A gun safe is a dead load since it will remain in one location (you will not move it around the home).

Mobile houses are constructed using steel structures (similar to those seen in trucks), with the steel frame serving as a support (or foundation) for the wooden frame. The steel frame is supplied with wheels and axles at the production factory. Once installed, they are removed (although they can be reinstalled if necessary), allowing these homes to accommodate heavy household objects.

The majority are constructed with 2x6 floor joists. The floor deck is usually 3/4 or 5/8 inch thick. These flooring can withstand around 40 pounds per square foot of floor surface.

A new mobile home should handle the weight of a gun safe with ease. One thing to think about is what else would go in there outside the gun safe. Follow the directions while installing your mobile home to guarantee proper leveling (always keep a re-leveling kit on hand) and waterline leveling.

However, if your mobile home is old and the frame structure has been damaged by water leaking, the floor may fall under the weight, causing the decking boards to shatter. Water damage is most common behind bathroom piping and fixtures and around doors and windows.

Right Location

The best position for your gun safe is a balance of convenience and accessibility. Furthermore, different areas of your home give varying degrees of protection from fire, flood, and theft. As a result, depending on where you reside, you must do a risk assessment to determine which threat elements are the most dangerous. If you believe your neighborhood is prone to thefts, for example, you'll want rapid access to your firearm if such a circumstance arises.

Because you want to put your gun safe in a mobile home, you'll need to install it above a steel beam to assure proper structural support. However, moving the safe within your mobile home would be a struggle due to its great weight. So instead, concrete stairs leading to the door would suffice to give the necessary stability.

Flooring

You must know how much weight your floor can support. The material, size, and distance between the floor joists can be estimated. You can get assistance from an expert or look for calculators online. A firm floor is far superior to a carpeted floor to anchor a gun safe.

Bolting Your Safe

It's always a good idea to secure your car gun mount in a mobile home, but only after you've narrowed down the best spot. It's a legal requirement that prevents your safe from being pushed over and inflicting an injury.

You must check that the safe is aligned correctly before anchoring it down, or the lock and bolt may malfunction. In addition, the safe door may open or close by itself on an uneven surface, posing a danger of injury.

Your safe should be secured in all four corners. Bolts that are half-inch or more significant should be utilized. Galvanized/zinc plated or steel bolts should be used if the floor is constructed of concrete. Because concrete floors contain moisture, the bottom surface of the safe will corrode. The bolts should be drilled straight into the wood if the flooring is made of wood.

Keep Out The Humidity And Heat

So you've finished repairing your gun safe in your mobile home. First, please make sure that the room is not too hot or humid. Humidity is your adversary, and it can ruin your guns. That's why you shouldn't store your safe in your garage or basement.

Too much heat is also unhealthy, so upper floors should be avoided. Keeping the ambient temperature and humidity under control is always the best approach to preserve your collection in good shape.

Are You Going To Be Moving Often?

There should be no problem with your gun safe and the floor if your mobile home is stationary and not likely to move much.

However, if you repeatedly move or jack your home, the unequal load created by the movement may cause your floor to cave in. This could also cause the safe and its door to become misaligned.

Where Should the Safe be Placed?

The first thing to think about is where you're going to put the safe. If you put a heavyweight safe in the center of the room, the floor might not sustain the weight. It is usually advised that the safe be placed against a wall. It is recommended to do so and then fix it to the wall for tiny personal safes, typically kept in one's closet. This supports the safe's weight while also preventing it from being easily grasped.

However, this is done for larger safes because the construction of a house is best supported where walls are located. This means that if you set a safe against a wall and possibly even secure it against the wall, the wall will assist the floor in supporting the safe's weight.

Another thing to think about is what's beneath the floor where the safe will be kept. Is the safe going to be installed in the basement, on the main floor above a basement, or even above a crawl space? What kind of floor do you have and where in the house can significantly impact safety and how much, if any, reinforcement do you need. All of these will play a role in determining whether and how you should reinforce the floor for a gun safe.

Conclusion

Overall, strengthening the joists of the structure beneath the safe is the most excellent way to ensure the strength of your floors.

If you're not sure how to accomplish it, get a local carpenter to look it over and assist you. Just make sure you do so before you put the safe in place, as doing it after that may be difficult. The consequences of not taking adequate precautions before installing a safe aren't even worth considering. Many insurance companies, I'm sure, will refuse to pay out for anything that was caused by your activities. Gun mount or vehicle holster, holster mount, or vehicle mount with conceal carry from gun laws that can be used for self-defense.